Analogue Voltage Input Modules

Automation Products | Opto 22 | SNAP PAC System | Brains and SNAP IO | Analogue |  Analogue Voltage Input Modules

Load Cell (2 or 3 mV/V)Load Cell (2 or 3 mV/V) Ref: SNAP-AILC

The SNAP-AILC input module works with 2 mV/V and 3 mV/V load cells as a load cell front end. Using a separate 24 VDC power source (purchased separately), the module provides isolated 10 VDC bridge excitation for up to four 350 ohm or 415 ohm load cells.

NOTE: This module only works with SNAP-B3000-ENET, SNAP-ENET-S64, SNAP-UP1-ADS, and SNAP-UP1-M64 Ethernet-based brains. These brains must have firmware version R6.1c or newer installed to use the SNAP-AILC module.

Datasheet


Load Cell (3 or 4 mV/V)Load Cell (3 or 4 mV/V) Ref: SNAP-AILC-2

The SNAP-AILC-2 input module works with 3 mV/V and 4 mV/V load cells as a load cell front end. Using a separate 24 VDC power source (purchased separately), the module provides isolated 10 VDC bridge excitation for up to four 350 ohm or 415 ohm load cells.

The SNAP-AILC-2 is primarily used with high-quality 4 mV/V load cells to gather data from force measurement testing.

NOTE: This module works with SNAP PAC brains and R-series controllers. It also works with the following legacy brains, if they have firmware version R6.1c or newer: SNAP-B3000-ENET, SNAP-ENET-S64, SNAP-UP1-ADS, and SNAP-UP1-M64.

NOTE: This module only works with SNAP-B3000-ENET, SNAP-ENET-S64, SNAP-UP1-ADS, and SNAP-UP1-M64 Ethernet-based brains. These brains must have firmware version R6.1c or newer installed to use the SNAP-AILC module.

Datasheet


4-Channel (-150 to +150 mV)4-Channel (-150 to +150 mV) Ref: SNAP-AIMV-4

The SNAP-AIMV-4 provides four channels of analog-to-digital conversion. Each channel can be configured for -150 mV DC to +150 mV DC or -75 mV DC to +75 mV DC. This module can be used only with SNAP Ethernet-based brains. Although the four channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices.

Datasheet


4-Channel (-50 to +50 mV)4-Channel (-50 to +50 mV) Ref: SNAP-AIMV2-4

The SNAP-AIMV2-4 provides four channels of analog-to-digital conversion. Each channel can be configured for -50 mV DC to +50 mV DC or -25 mV DC to +25 mV DC. This module can be used only with SNAP Ethernet-based brains. Although the four channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices.

Datasheet


2-Channel (-10 to +10 VDC)2-Channel (-10 to +10 VDC) Ref: SNAP-AIV

The SNAP-AIV provides two channels of analog voltage input, either -10 to +10 VDC or -5 to +5 VDC. Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices. Modules are factory calibrated.

Datasheet


32-Channel (-10 to +10 VDC)32-Channel (-10 to +10 VDC) Ref: SNAP-AIV-32

The SNAP-AIV-32 analog input module provides 32 channels of analog voltage input. Each channel can be configured for -10 to +10 VDC or -5 to +5 VDC operation. Although the 32 channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices. This module can be used only with SNAP PAC brains and on-the-rack controllers.

For field wiring, use the SNAP-HD-CBF6 wiring harness with flying leads, or the convenient SNAP-AIV-HDB breakout board with a SNAP-HD-BF6 cable.

Other options:
Channel-to-channel isolation (two channels): SNAP-AIV-i
Four channels (not isolated): SNAP-AIV-4

Datasheet


4-Channel (-10 to +10 VDC)4-Channel (-10 to +10 VDC) Ref: SNAP-AIV-4

The SNAP-AIV-4 provides four channels of analog voltage input. Each channel can be configured for -10 to +10 VDC or -5 to +5 VDC operation. Although the four channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices. This module can be used only with SNAP Ethernet-based brains.


Datasheet


8-Channel (-10 to +10 VDC)8-Channel (-10 to +10 VDC) Ref: SNAP-AIV-8

The SNAP-AIV-8 provides eight channels of analog voltage input. Each channel can be configured for -10 to +10 VDC or -5 to +5 VDC operation. Although the eight channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices. This module can be used with SNAP Ethernet-based brains, SNAP PAC R-series controllers, and SNAP PAC SB-series serial brains.

NOTE: This module does not provide channel-to-channel isolation. If you need an isolated module, see the two-channel SNAP-AIV-i module.

Datasheet


2-Channel (-10 to +10 VDC) Isolated2-Channel (-10 to +10 VDC) Isolated Ref: SNAP-AIV-i

The SNAP-AIV-i provides two isolated channels of analog voltage input. Each channel can be configured for -10 to +10 VDC or for -5 to +5 VDC operation. In addition to having two channels isolated from each other, the module is also transformer isolated and optically isolated from other modules and devices.

Datasheet


2-Channel (-1 to +1 VDC) Isolated2-Channel (-1 to +1 VDC) Isolated Ref: SNAP-AIV-iS

The SNAP-AIV-iS provides two isolated channels of analog voltage input. Each channel can be configured for -1 to +1 VDC operation. In addition to having two channels isolated from each other, the module is also transformer isolated and optically isolated from other modules and devices.


2-Channel (-100 to +100 VDC) Isolated2-Channel (-100 to +100 VDC) Isolated Ref: SNAP-AIV2-i

The SNAP-AIV2-i provides two isolated channels of analog voltage input, -100VDC to +100VDC. In addition to having two channels isolated from each other, the module is also transformer isolated and optically isolated from other modules and devices.

Datasheet


Automation Products | Opto 22 | SNAP PAC System | Brains and SNAP IO | Analogue |  Analogue Voltage Input Modules


Contact Us

t:: 01928 571 977

f:: 01928 571 988

1 Beeston Court
Manor Park
Runcorn
Cheshire
WA7 1SS


SDUK News-Subscribe










* required

Email Marketing by VerticalResponse

1 Beeston Court, Manor Park, Runcorn, Cheshire, WA7 1SS
(T): 01928 571 977 (F): 01928 571 988